Electrical Accessories
  Brass Earthing Accessories
1. Earth Rod
2. 'A' Clamp - Small
3. 'A' Clamp - Big
4. 'B' Clamp
5. 'U' Clamp
6. Special Type Clamp
7. Split Clamp
8. Saddle Light
9. Saddle Heavy
10. Brass Coupler
11. Cross Saddle
12. Test Bond
Brass Earthing Accessories
   
   
Earth Rod
Manufactured from high tensile, low carbon steel and bonded by high conductivity copper. Also manufactured from solid copper.
Available in threaded and unthreaded with 9.5mm dia to 17mm dia & length 4" to 8"
Earth Rod
 
Back
   
   
'A' Clamp - Small
Use for 9.5mm to 12.0mm(1/2") Rod Dia
Manufactured in Naval Brass to BS2874
'A' Clamp - Small
 
Back
   
   
'A' Clamp - Big
Use for 5/8" (16mm) Rod dia
Manufactured in Naval Brass to BS2874
'A' Clamp - Big
 
Back
   
   
'B' Clamp
Use for ½" Rod dia
Manufactured in Naval Brass to BS2874
'B' Clamp
 
Back
   
   
'U' Type Clamp
Use for 5/8" (16mm) Rod dia
Manufactured in Naval Brass to BS2874
'U' Type Clamp
 
Back
   
   
Special Type Clamp
Use for 5/8" (16mm) Rod dia
Manufactured in Naval Brass to BS2874
Special Type Clamp
 
Back
   
   
Split Type Clamp
Use for 9.5 mm (3/8") to 19mm(3/4")
Rod dia
Manufactured in Naval Brass to BS2874
Split Type Clamp
 
Back
   
   
Saddle Light
Use for 25 mm2 and 50 mm2
Copper Tape
Manufactured in Naval Brass to BS2874
Saddle Light
 
Back
   
   
Saddle Heavy
Use for 25 mm2 and 50 mm2
Copper Tape
Manufactured in Naval Brass to BS2874
Saddle Heavy
 
Back
   
   
Brass Coupler
Used for 1/2" to 3/4" and 12mm to 19mm
Earth Rod
Manufactured in Naval Brass to BS2874
Brass Coupler
 
Back
   
   
Cross Saddle
Use for 25 mm2 and 50 mm2
Copper Tape
Manufactured in Naval Brass to BS2874
Cross Saddle
 
Back
   
   
Test Bond
Used for 1/2" to 3/4" and 12mm to 19mm
Earth Rod
Manufactured in Naval Brass to BS2874
Test Bond
 
Back